| Paul C. Buff, Inc. Technical Forum http://paulcbuff-techforum.com/ |
|
| CSR+ with AB400 lights http://paulcbuff-techforum.com/viewtopic.php?f=8&t=30 |
Page 1 of 1 |
| Author: | gcrowder [ Sun Dec 13, 2009 7:31 pm ] |
| Post subject: | CSR+ with AB400 lights |
At a shoot I set up my lights with 4 CSR+s. One of them when plugged in to a AB400, the AB400 red dump light came on immediately when the RJ-11 was plugged in. I switched lights and with the same results. The other 3 performed perfectly. I am using the CC to adjust the lights and CST to flash the lights from the camera. |
|
| Author: | Technical Support [ Mon Dec 14, 2009 9:48 am ] |
| Post subject: | Re: CSR+ with AB400 lights |
double check the channel on the CC, ensure that it is not set to "standby" in the "light settings" option in the "setup" screen. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|