| Paul C. Buff, Inc. Technical Forum http://paulcbuff-techforum.com/ |
|
| CC Firmware upgrade http://paulcbuff-techforum.com/viewtopic.php?f=8&t=4247 |
Page 1 of 1 |
| Author: | Pxlwz [ Fri Nov 15, 2013 3:37 pm ] |
| Post subject: | CC Firmware upgrade |
How far does the SD card go into the cyber commander? I can get my 2 cards about halfway in, but they don't upgrade the firmware. Looked at the CC manual, and it looks like it should go all the way in (like with the Einstein). I tried that, and just broke the first card. I guess, I better upgrade my Einsteins first, before I try again. Thank you, Markus |
|
| Author: | Pxlwz [ Fri Nov 15, 2013 4:42 pm ] |
| Post subject: | Re: CC Firmware upgrade |
Never mind, i did not realize, that there is a card already installed from the factory. Banging my head against the wall! Markus |
|
| Author: | Mack [ Sun Nov 17, 2013 11:55 am ] |
| Post subject: | Re: CC Firmware upgrade |
Your are lucky. This new firmware seems to have bricked mine. I just get an endless loop of white flashing screens. Let it run for 5 minutes and it's still flashing white screens. Pulled batteries and card. Put in batteries and now I got a black screen and nothing works. Just fine - NOT! Seems it should have been made with a "Loading new firmware" bar or something, even a "Firmware update failed, try again." rather than a long interval of flashing white screens that appear like it is going nuts. And then it does... Cannot do another firmware update either so far. It's tanked. :evil: BE VERY CAREFUL WITH THIS NEW FIRMWARE UPDATE ELSE YOU MAY OWN A WORTHLESS CYBERCOMMANDER! Out to find a shipping box I guess. :( Mack |
|
| Author: | HotShot [ Sun Nov 17, 2013 2:49 pm ] |
| Post subject: | Re: CC Firmware upgrade |
Just updated 3 Einsteins and 1 CC without issue. |
|
| Author: | teendoc [ Sat Aug 20, 2016 1:19 pm ] |
| Post subject: | Re: CC Firmware upgrade |
I know this is an old post, but I just followed the instructions to update the firmware and now my unit is flashing for several minutes but has not returned to the main screen. I don't want to render it nonfunctional but I need it to work for my shoot tomorrow. What should I do? |
|
| Author: | teendoc [ Sat Aug 20, 2016 1:36 pm ] |
| Post subject: | Re: CC Firmware upgrade |
teendoc wrote: I know this is an old post, but I just followed the instructions to update the firmware and now my unit is flashing for several minutes but has not returned to the main screen. I don't want to render it nonfunctional but I need it to work for my shoot tomorrow. What should I do? I managed to get it sorted when I searched again for help and found this old post: viewtopic.php?f=8&t=4403 It all seems to be working now, thank goodness! |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|