Paul C. Buff, Inc. Technical Forum http://paulcbuff-techforum.com/ |
|
Just bought a set of 640's for product photos, HELP! http://paulcbuff-techforum.com/viewtopic.php?f=8&t=4339 |
Page 1 of 1 |
Author: | PlaneJane13 [ Wed Jan 29, 2014 11:01 pm ] |
Post subject: | Just bought a set of 640's for product photos, HELP! |
:) I am currently using 3 E640 flash units with a Cannon Rebel XT to photograph luxury ladies accessories. I can attach a photo of what we have accomplished in the past as far as the lighting is concerned. For some unknown reason the flash units are not giving us that desired effect. I need advice on achieving the best desired effect and how to set it up. The current background is studio grey paper on a roll. I have been taking the Photos at 1/200 sec @f4 using a Cannon Rebel XT Is there a way to attach a photo in this forum? Thanks, Bob |
Author: | Technical Support [ Thu Jan 30, 2014 10:40 am ] |
Post subject: | Re: Just bought a set of 640's for product photos, HELP! |
A before and current shot would be helpful. Also, how are you triggering your lights? |
Author: | PlaneJane13 [ Thu Jan 30, 2014 1:07 pm ] |
Post subject: | Re: Just bought a set of 640's for product photos, HELP! |
Technical Support wrote: A before and current shot would be helpful. Also, how are you triggering your lights? Excuse my dumbness, how do I upload a photo here? and lights are triggered with a wireless from the hot shoe. I uploaded to FB, try this link for the photos. there are two photos just click on the fwd link for the second one. https://www.facebook.com/photo.php?fbid ... =1&theater |
Author: | Technical Support [ Thu Jan 30, 2014 2:17 pm ] |
Post subject: | Re: Just bought a set of 640's for product photos, HELP! |
The link does not let me see the images, it takes me to an error page. But when typing a message, there is a row of turquoise buttons with the B,i,u, "Quote" etc. In that row is a button that says IMG. Click that button, and "img" and "/img" will appear in brackets. You can then paste the url of the image between the two sets of brackets. The image will then appear in the post once submitted. |
Author: | PlaneJane13 [ Thu Jan 30, 2014 2:24 pm ] |
Post subject: | Re: Just bought a set of 640's for product photos, HELP! |
Author: | Technical Support [ Thu Jan 30, 2014 2:58 pm ] |
Post subject: | Re: Just bought a set of 640's for product photos, HELP! |
I believe the security settings are preventing me from seeing the images on face book. If you would like, you can email them to info@paulcbuff.com attn:david Or you can change the security settings for that image, or host them somewhere else, like Flickr or other hosting sites. Also, when posting a link, [img.]your link goes here between these brackets[/img]. The cursor should default to where you should paste. |
Author: | PlaneJane13 [ Thu Jan 30, 2014 5:31 pm ] |
Post subject: | Re: Just bought a set of 640's for product photos, HELP! |
sent you an email. |
Author: | lucky96 [ Tue Mar 14, 2017 8:11 am ] |
Post subject: | Re: Just bought a set of 640's for product photos, HELP! |
PlaneJane13 wrote: :) I am currently using 3 E640 flash units with a Cannon Rebel XT to photograph luxury ladies accessories for wedding photography wollongong. I can attach a photo of what we have accomplished in the past as far as the lighting is concerned. For some unknown reason the flash units are not giving us that desired effect. I need advice on achieving the best desired effect and how to set it up. The current background is studio grey paper on a roll. I have been taking the Photos at 1/200 sec @f4 using a Cannon Rebel XT I think you should use a single flash unit with yours and also increase the light around the product. Quote: Is there a way to attach a photo in this forum? Thanks, Bob And for this there is a tag called img that can be used to attach images here. Goodluck. :D |
Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |