Paul C. Buff, Inc. Technical Forum http://paulcbuff-techforum.com/ |
|
cyber commander: spontaneous firing of einsteins http://paulcbuff-techforum.com/viewtopic.php?f=8&t=4700 |
Page 2 of 2 |
Author: | Jhighet [ Fri Jan 13, 2017 12:18 pm ] |
Post subject: | Re: cyber commander: spontaneous firing of einsteins |
Hi. I found this thread very interesting. I too just experienced this same problem (yesterday). Both me and the clients were getting grumpy on the set. I was using the Cyber Commander and two Einsteins with wireless receivers. Slave mode was OFF on both devices. I had alkaline batteries in the Cyber Commander. No indication the battery levels were running low. I turned off the overhead lights within this office space, however, there were florescent lights on nearby. I was on the 26th floor of a high rise on a cold/dry day. I was working on a faux wood floor in this office (no carpet). The spontaneous flashing occurred whenever I touched my camera, or tripod. Tripod has rubber footies on it. I would get 2 -3 spontaneous flashes after I grabbed my camera or tripod. Flashes stopped once I started shooting. Made me wonder if static electricity was coming into play, or maybe the grounding with my D7100 hot shoe is bad. The static electricity may play a role because I used the same setup at home the night before without any erroneous flashes. This was on carpet flooring though....go figure. I've shared all this info with Dave @ Buff Technical support. |
Page 2 of 2 | All times are UTC - 6 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |