Paul C. Buff, Inc. Technical Forum
http://paulcbuff-techforum.com/

Honeycomb Grid on Moonunit
http://paulcbuff-techforum.com/viewtopic.php?f=8&t=4907
Page 1 of 1

Author:  sharkguy [ Wed Mar 23, 2016 12:01 pm ]
Post subject:  Honeycomb Grid on Moonunit

Just added a cheap ($9.00) 80 cm grid I bought off eBay to my 30" moonunit. Obviously it wasnt made for the moonunit, but I was able to attach it. I will have to do some slight modification to make it easier to attach and remain attached. I added the front diffusion panel before I added the grid. Wanted to try this to control light spill from the moonunit. I then trigger the ABR800 with radiopoppers. I am doing this since the ABR800 is my only studio strobe. since the ABR800 is versatile
I also use it with PLM's and with Vagabond Mini I use Ken Wheeler mod to use for events.
I havent really put it through the test to a great extent. Am I barking up the wrong tree or would this be helpful. I wanted to have a gridded octabox for the ABR.

Here is setup: https://www.flickr.com/photos/yachtclub/25373791404/

Here is first test shot and explanation what I was trying to do: https://www.flickr.com/photos/yachtclub/26006487565/

Thanks,

Tom

Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/