| Paul C. Buff, Inc. Technical Forum http://paulcbuff-techforum.com/ |
|
| Vagabond Mini and the DigiBee Modeling Lamp. http://paulcbuff-techforum.com/viewtopic.php?f=8&t=4937 |
Page 1 of 1 |
| Author: | evisphoto [ Wed Jul 20, 2016 11:31 pm ] |
| Post subject: | Vagabond Mini and the DigiBee Modeling Lamp. |
So, it's pretty well understood that the Modeling lamps should generally not be used when the Vagabond Mini is used to power a strobe. With the new LED lamp on the Digibee, does this still apply? |
|
| Author: | Technical Support [ Thu Jul 21, 2016 10:08 am ] |
| Post subject: | Re: Vagabond Mini and the DigiBee Modeling Lamp. |
This is not a simple yes or no answer. Model lamps were not recommended for use as they generally exceed the load allowed by the Vagabond Mini, and will deplete the battery at a very fast rate. Lower power model lamps are available, but are not generally effective/as useful. With the DigiBee, the 75W actual draw is well within the limits of the VML's capability, and is extremely bright. If the brightness was reduced to that of a standard 150W model lamp, the actual power draw would be even less, providing enough light to be useful while not draining the battery terribly fast, but it is still a continuous load, which will reduce the number of shots per charge. So, yes, the model lamp can be used, but still at a cost. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|