Paul C. Buff, Inc. Technical Forum
http://paulcbuff-techforum.com/

Confused: Setup Digibee with cyber commander
http://paulcbuff-techforum.com/viewtopic.php?f=8&t=4972
Page 1 of 1

Author:  Fall_Guy [ Thu Oct 13, 2016 8:26 pm ]
Post subject:  Confused: Setup Digibee with cyber commander

I have a new digibee 800 with transceiver. I can't seem to figure out how to setup my cyber commander to see/control it. The speclight setup menu does not have the digibee as an option.

The light is responding to flash test from cyber commander but I don't know channel it's on or how to set the channel. I assume it's on channel one as my CSR+ but not entirely sure. Not as simple as my CRS+ with manual frequency and channel selectors.

Since the light is new I have not found any specific instructions for setting up the digibee.

Thanks for the help.

Author:  Technical Support [ Mon Oct 17, 2016 9:08 am ]
Post subject:  Re: Confused: Setup Digibee with cyber commander

Pages 25 through 27 of the Cyber Commander manual specify the exact steps to enter the DigiBee. It is also identical to the steps in the CC manual for entering Einstein. It is automatically defined when you open from "STUDIO" or its specific channel in the OPEN MEMORY option of the SETUP screen.

http://www.paulcbuff.com/manuals/digibee.pdf

Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/