Paul C. Buff, Inc. Technical Forum
http://paulcbuff-techforum.com/

Tips on Attaching Black Outer Cover to 86" PLM?
http://paulcbuff-techforum.com/viewtopic.php?f=8&t=5026
Page 1 of 1

Author:  jbuttonphoto [ Sun Feb 12, 2017 1:36 pm ]
Post subject:  Tips on Attaching Black Outer Cover to 86" PLM?

I just purchased the 86" PLM and am having a hard time installing the black outer cover. It doesn't seem to be lining up with the umbrella. Anyone have any tips or tricks they found helpful when installing it? Thanks!

Author:  Technical Support [ Mon Feb 13, 2017 3:05 pm ]
Post subject:  Re: Tips on Attaching Black Outer Cover to 86" PLM?

My way of doing this is to lay the cover over the collapsed PLM, then open it slightly. I then work my way around, one tip at a time, then fully open the PLM.

Expect it to be a little tight, but if the ribs do not spread and position where they should, even by hand, then there may be something amiss.

Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/