myselfman wrote:
I'm shooting with 3 AB800, CSRB+, and Cyber Commander. When I have my lights powered by my vagabond I randomly have my dump light to stay on and the AB does not fire.
I've seen this exact symptom w/ a B1600 when running off a vagabond and radiopoppers. It's some sort of tolerance issue w/ the opamps in the RJ11 interface and the vagabond's lower voltage. See if you can isolate it to a specific AB800 (only one of my B1600's had this issue).
You can also try the workaround on the powerup sequence that worked for me...set the power level to the bee to full and the modeling slider to full (no need to turn on the modeling lamp), plug in the CSRB+ but don't turn it on. Power up the bee when plugged into the vagabond. Then power up the CSRB+. Fire a bunch of shots and it should be stable.
If all your bees get into this dump mode (you can actually see the flash tube flicker when you test fire it), your vagabond probably needs replacing because it's putting out too low a voltage...