Paul C. Buff, Inc. Technical Forum

Technical Discussion Forum for all Paul C. Buff, Inc. Products

Login | Register

Post a reply
 [ 2 posts ] 

Fri Apr 14, 2017 6:42 am

Joined: Fri Apr 14, 2017 6:37 am
Posts: 1

Hi, tried searching forum no joy.

Having some trouble with my cybercommander. Often it will not trigger the CSRB+ and the CSR+; I recently upgraded to CSR+ as I thought perhaps the B+ were not reliable. Same problem. Unfortunately all I have is no firing even if i start all over with everything off then back on.

Biggest problem is the CyberCommander restarts and resets all lights when I try to meter in the "all" setting. At the point where I switch to my backup triggers and manually meter and set as it is faster. Which defeats the purpose!

I am on firmware 50, cannot find anything newer and the commander is less than a year old. Any one else experience?


Top Top


Mon Apr 17, 2017 3:32 pm

Site Admin
Joined: Tue Dec 08, 2009 10:43 am
Posts: 5227

First, make sure your lights are set to full power via the power slider on the back of the light. Also, make sure all power supplies are grounded. For the purposes of testing, remove any power strips or extension cords.

Also, make sure your lights are defined in the Cyber Commander. You will want a vertical blue gray bar for each channel that has a light.

Once this is verified, and you have plugged everything in and turned them on, try firing from the ALL channel setting. Also, the first button press from sleep wakes the commander. The second button press is ignored to avoid inadvertent commands. The third should fire the lights. Once the lights are fired in ALL, they should fire individually.

If the system is still not functioning as expected, you should probably call us for real time trouble shooting. You will want your equipment present and set up.


Top Top
Display posts from previous:  Sort by  
Post a reply
 [ 2 posts ] 

All times are UTC - 6 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 9 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: