| Paul C. Buff, Inc. Technical Forum https://paulcbuff-techforum.com/ |
|
| Nikon SB700 https://paulcbuff-techforum.com/viewtopic.php?f=8&t=4214 |
Page 1 of 1 |
| Author: | projectraw [ Thu Oct 17, 2013 2:13 pm ] |
| Post subject: | Nikon SB700 |
I am new to using remote triggers. I was gifted a Cybersync CSRB and CST. I have read the manual and the forum. From my understanding the SB700 does not have a PC outlet (or any outlet) for the CSRB to connect to. Is my flash unable to work with this Cybersync setup? I only have 1 speedlight for now but want to get at second soon. I want to understand how to use them with remote triggers. Thank you! |
|
| Author: | Technical Support [ Thu Oct 17, 2013 2:37 pm ] |
| Post subject: | Re: Nikon SB700 |
You can use an adapter to go on the foot of the speedlite. FlashZebra carries a variety of cords an adapters, but we also carry a generic adapter here: http://www.paulcbuff.com/hotshoeadapters.php You will want the bottom one. Also, there will be no TTL with the CyberSync system regardless of adapter. The flash will need to be put in manual mode. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|